You are here: Experiment Guide > Imaging Modes > Nanomechanical Mapping > PeakForce QNM Limits

PeakForce QNM Limits

These parameters work like other limits in the NanoScope software. Numbers in the NanoScope software are represented using 16 bits and thus various quantities are represented as illustrated in Figure 1.

Figure 1: Illustration of PeakForce QNM Limits

As with other limits, setting the limit too high increases the bit noise. Setting the limit too low can result in wrapped data and inverted contrast. The limits of the following parameters can be set by the user:

 

www.bruker.com Bruker Corporation
www.brukerafmprobes.com 112 Robin Hill Rd.
nanoscaleworld.bruker-axs.com/nanoscaleworld/ Santa Barbara, CA 93117
   
  Customer Support: (800) 873-9750
  Copyright 2010, 2011. All Rights Reserved.