There are
All groups are available the Scan Parameters List of the Check Parameters and Scan views, while the Volatam and Temporal parameter groups are also available in the Electrochemistry window. These groups are slightly different in AFM modes and in potentiostat/galvanostat modes. Table 1 lists the parameters and the parameter group in which they are found. An example is shown in Figure 1.
| Parameter | Parameter Group | EC |
|---|---|---|
| E | Ramping Controls | AFM |
| Elec area | Voltam | AFM |
| Cell Current | Ramping Controls | AFM |
| I range | Voltam | AFM |
| I range | Temporal | AFM |
| Sample rate | Ramping Controls | AFM |
| Temporal Function | Temporal | AFM |
| Time range | Temporal | AFM |
| Voltam Function | Voltam | AFM |
| Volt Maximum | Voltam | AFM |
| Volt Minimum | Voltam | AFM |
| Volt range | Temporal | AFM |
Table 1: EC AFM Control Panel Parameters
Figure 1: An example of the Parameter List specific for Electrochemistry (QNM in Potentiostat mode is shown)
| www.bruker.com | Bruker Corporation |
| www.brukerafmprobes.com | 112 Robin Hill Rd. |
| nanoscaleworld.bruker-axs.com/nanoscaleworld/ | Santa Barbara, CA 93117 |
| Customer Support: (800) 873-9750 | |
| Copyright 2010, 2011. All Rights Reserved. |