You are here: Experiment Guide > Imaging Modes > Electrochemistry > Electrical Connections

Electrical Connections

Table 1 lists the connections to the EC spring terminal block shown in Figure 1.

Code	Electrode
C	Counter electrode
W2	Spare
R	Reference electrode

Table 1: Electrode labels

Figure 1: The EC spring terminal block

To attach the electrode to the spring terminal block, stretch the spring using your fingers or tweezers and slide the electrode wire between the spring coils.

NOTE: The spring contact block is magnetically mounted and can be repositioned as needed. Ensure that there is some slack in the wires from the EC cell to the spring terminal block.

Figure 2: Assembled EC cell using the BeCu spring contact

Return to Setup Procedures.

www.bruker.com	Bruker Corporation
www.brukerafmprobes.com	112 Robin Hill Rd.
nanoscaleworld.bruker-axs.com/nanoscaleworld/	Santa Barbara, CA 93117

	Customer Support: (800) 873-9750
	Copyright 2010, 2011. All Rights Reserved.